|
Written by Wayne Hayward
|
|
Monday, 08 August 2011 15:16 |
 Further to the popular webinar that we held with Plastics Technology magazine, the editors of the magazine asked us to develop the webinar into a printed article to be published in the September issue of the magazine. Click here to see a copy of the article. |
|
Last Updated on Tuesday, 09 August 2011 08:31 |
|
|
Written by Wayne Hayward
|
|
Friday, 13 May 2011 12:53 |
 We recently held a webinar with Plastics Technology Magazine on Troubleshooting Bad MFI Results. The webinar was, again, very well attended with lots of interest and many questions at the end of the webinar. The webinar was recorded and is available for download from gotomeeting, so if you were unable to attend the webinar, you can listen to it now. Click here to listen to the recording. |
|
Last Updated on Friday, 13 May 2011 13:10 |
|
Written by Wayne Hayward
|
|
Thursday, 05 May 2011 12:05 |
|
We will be exhibiting at a couple of shows shortly, namely MDM East at the Javitz Center in New York, and the PlastEx show in Toronto. We will be on booth #371 at the MDM East show, and on booth #2052 at the PlastEx show and we hope to see you there. We will have our H5kS tensile tester and our MP600 melt indexer on display and our experts will be availble to answer your questions. |
|
|
Written by Wayne Hayward
|
|
Thursday, 05 May 2011 11:48 |
|
We recently held another webinar on the performance of our new video extensometer. The webinar was sponsored with Modern Plastics magazine and was extremely well attended, with almost all attendees staying through to the end of the webinar. If you would like to see and hear the webinar, click on the title screen on the left and you'll be taken to the recorded webinar. |
|
Written by Wayne Hayward
|
|
Tuesday, 05 April 2011 09:11 |
 We recently held a webinar with ASM International on the Measurement of Uncertinty in a Tensile Test. The webinar was very well attended with lots of interest and many questions at the end of the webinar. The webinar was recorded and is available for download from ASM International, so if you were unable to attend the webinar, you can listen to it now. Click here to download the recording. |
|
|
|
|
|
|
Page 1 of 3 |
